What is the method of installation and debugging of construction waste crusher?

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

What is the method of installation and debugging of construction waste crusher?

xuanxuan
In recent years, with the rapid development and widespread application of the construction waste crusher industry, more and more people are realizing the potential and prospects of the construction waste crushing machinery industry. More manufacturers are beginning to join the crusher industry. We have been manufacturing machinery and equipment for many years and have rich experience in production. Our construction waste crusher is also our best equipment, so today we would like to tell everyone about the installation and commissioning of the construction waste crusher.
1, the first machine leveling, firmly fixed on the cement foundation.
2, clean the oil and debris on the machine, the transmission, sports parts filling oil.
3, check the various parts of the screw is loose.
4, adjust dial, stamping and other parts of the position of the degree and clearance, after adjusting the hand-driven pulley, the operating parts should be able to operate freely.
5, the host pulley steering clockwise clockwise. Prohibited inversion, before turning off the triangle with the test motor steering, the steering wheel and motor rotation steering wheel alignment can be fitted with a test strip.
6, when the test machine first use the jog method to make the motor pulse rotation, such as no other noise, the normal operation before driving. Heavy truck is strictly prohibited to start until the machine is functioning properly before feeding production.
construction waste crusher in the market with its own strength has made some achievements, by everyone's favorite, suitable for our customers to use.