The third generation sand making machine equipment common fault analysis
In the field of machinery industry equipment has shown a lot of advanced equipment, such as double gold cone sand making machine. sand making machine has been developed to the third generation sand making equipment. No matter how advanced the equipment, it is hard to avoid some running faults. Today, we introduce the common faults of the third generation sand making machine, hoping to help more people solve the problems as soon as possible and improve the work efficiency.
In the course of operation, the third generation of sand making equipment may appear overloaded jumping situation. In general, such a situation occurs in order to protect the safety of the equipment and is a self-protection measure of the equipment. In the event of a jerk, you need to check the process of its associated equipment or see if there is a higher hardness object entering the equipment. Once there is a hard object into the device, it will lead to operational problems. In particular, we must pay attention to its import and export inspection, as much as possible to protect the smooth conveyor belt, to avoid the existence of aggregate or debris affect the normal operation of equipment.
2. Displacement sensor is damaged
In the event of such a failure, a malfunction of the equipment may occur. And this is often because the vibration is larger or there is a sleeve off the sensor displacement probe appears damaged, thus resulting in measurement of inaccurate phenomenon. For the problems caused by large vibration need to strengthen the damping design to ensure its efficiency is higher.
3 reducer problems
If the equipment is running, the emergence of large particles of the material and the number of more words. Then it will cause overload operation, which makes its reducer failure, you want to protect the normal operation must ensure stable working conditions, reduce the frequency of parking can be.