The position of the European version of the ultra-fine grinding machine auxiliary machine can not be changed at will.

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

The position of the European version of the ultra-fine grinding machine auxiliary machine can not be changed at will.

xuanxuan

The European version of the ultrafine mill includes the main mill, analysis machine, fan, electric control cabinet, etc., except for the mainframe, all of which are auxiliary machines. Recently, customers have asked us if we can change the lower dust collector because of the site restrictions. s position.
The customer now wants the other parts to move, and wants the toner collector to move 90 degrees, which can reduce the curvature of the pipe after the powder is discharged. The idea is good, but it is not feasible.
why? Because the position of each auxiliary machine next to the main mill is a good match after long-term production test, the current position is good. Once one of them is moved, it must be moved. This is not just a matter of changing the process. It is necessary to change all drawings, otherwise it will affect the overall production effect.
Therefore, the European version of the ultra-fine mill can not change the position of the auxiliary machine at will, so the cost of buying two sets of grinding machinery, and not because of small loss.
The working condition of the European version of the mill is very bad, we must do regular maintenance and maintenance, otherwise it will seriously affect the service life of the accessories, not only bring trouble to the entire ultra-fine grinding production line, but also bring you huge Economic losses.
The European version of the ultrafine mill model has more bearings, each bearing is not the same way of maintenance, but each bearing is either using No. 1 grease or using sodium bitter grease for lubrication, please be sure to ensure that the grinding mechanical bearing per The oil should be added once every eight hours, the blower bearings should be refueled once a month, and the main engine center bearings should be refueled once every four shifts.
In addition to the regular lubrication of the lime powder superfine mill bearings, we should also pay attention to the temperature of the bearing chamber, which cannot exceed 70 degrees. When the bearing is found to be overheated, we should disassemble the cleaning bearing so that the grinding machine can operate well.