The function and principle of construction waste crusher
The construction waste crusher is an important step of secondary crushing in the beneficiation process. During the entire beneficiation process, the materials must be crushed a number of times to reach the required size. Therefore, the entire beneficiation process is extremely complicated, and the beneficiation type is also Differently, there are 12 construction waste processing stones, grinding equipment, screening and grading equipment, washing equipment, and magnetic separation equipment, etc. According to different types of mines, there are different types, to talk about construction waste. This kind of crushing equipment for processing stones.
After the material undergoes first-level crushing, it enters the construction waste crusher silo, and the material is subjected to high-speed impact by the plate hammer. The crushing object is continuously thrown onto the counterattack device installed above the rotor to crush it, and then rebounds from the counterattacking plate. The counterattack to the hammer area was counterattacked again and again. Different counterattack chambers filled with materials of different sizes. After entering the counterattack, the materials were uniformly broken into a standard size, and they would be separated from the broken construction waste crusher stone.
In the production process, it also has big and small problems. Due to the high-speed operation of the bearings, the temperature will be too high, and the stone will make a knocking sound when the construction waste crusher breaks. The following are better for these problems. It is recommended to stop the work and clean the broken stone in the middle, and check the fastening of the lining plate and the gap between the hammer and the lining plate and replace the broken one in time to ensure the normal operation.