The emergence of heavy hammer crusher is not only a solution to the problem of construction waste
The emergence of heavy Crusher manufacturers is not only a solution to the problem of construction waste, but also a convenient and sensitive way compared to other treatment methods. The main components of construction waste are waste concrete and waste bricks. These two need to be removed and reused by the hammer crusher, while others can be completely cleaned by discarding unused objects. Heavy hammer crushers are combinations of crusher equipment such as jaw crushers and cone crushers. It is free to move and is a good device for handling construction waste.
The heavy hammer crusher eliminates the initial crushing process of the jaw crusher and becomes a new type of crusher for large and small materials. It has the advantages of large output, high efficiency, low power, saving manpower and material resources, and reducing material crushing cost. After the crushing, the finished product has complete specifications, which can meet the needs of users with different production needs. It has a wide range of applications, can handle the crushing of various gravel materials, and solve the problem of tight sandstone resources.
Small wear: The hammer Crusher Machine has made a new breakthrough, changing the method of controlling the size of the discharge with the purlin, reducing the wear of the hammer in the crushing chamber and improving the service life of the hammer. Really achieved twice the effort to get twice the result. Low power consumption: The heavy hammer crusher achieves the effect of changing the third stage crush to the first stage crushing. As a medium crushing device, the cost can be reduced by 35%, and the energy consumption during the whole operation is low. Good finished product: The size and size of the finished stone can be adjusted as needed. Rough, medium, fine and complete specifications. The finished stone has no scales, smooth body and multi-angle edges to ensure compressive strength and application range. Broad and commercial value. Wear resistance of parts: The heavy hammer crusher produced by our company uses high-quality fittings, especially the selection of wear-resistant parts. The chrome alloy hammer is a more wear-resistant metal fitting in China.
The main working part of the hammer crusher is a rotor with a hammer, wherein the rotor consists of a main shaft, a disc, a pin and a hammer. The motor-driven rotor rotates at a high speed in the crushing chamber, and the material is fed into the machine from the upper feed port, and is subjected to high-speed hammer impact, impact, shearing and grinding. At the lower portion of the rotor, a screen deck is disposed, and the size of the comminuted material that is smaller than the size of the screen is discharged through the screen, and a coarse-grained grade greater than the size of the screen is retained on the screen. And continue to hammer and grind with a hammer and pass through the sieve plate. Exhausted from the machine.