Reasons for vibration during construction waste crusher production

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Reasons for vibration during construction waste crusher production

xuanxuan

At present, the market is constantly changing and developing, and the technical aspects are constantly improving. During the operation, users will encounter vibrations in the construction waste crusher. Let me explain to you the reasons for the vibration of the construction waste pulverizer.
1. During operation, if there is metal material entering the grinding disc, the vibration caused by it. In order to prevent metal from entering, iron removers and metal detectors can be installed on the construction waste shredder equipment.
Second, the grinding disc in the equipment does not form a mat, the crushing device and the liner inside the equipment will directly cause vibration. Thereby forming a mat.
Third, the amount of material to be cut must use the production capacity of vertical mill. When the material is lower than the vertical mill, the production layer will gradually become thinner. When the material layer is thin to the extent of the ***, the tension is required. Under the effect of its own weight, the construction waste pulverizer will indirectly contact to produce an impact and cause vibration.
4. When the hardness of the processed material is low, the friability is good. When the material has good friability, low hardness and high tension, it can cause vibration of the equipment when it is pressed in an instant according to the thickness of the material layer during operation.
5. The retaining ring is too low. When processing materials, when the retaining ring of the Mobile Crusher Plant is low, it is difficult to ensure a smooth thickness of the material layer, because it depends on the actual processing of the material. Appropriate adjustment of the height of the retaining ring, in order to achieve the highest efficiency of the equipment during operation, to avoid vibration.
Sixth, the hammer of the pulverizer is incorrectly installed. Generally, the hammer should be changed together when changing the face. Because the difference between the weights of the two hammers is large, so in order to avoid losing balance, strong vibration occurs.