How to Lubricate the construction waste crusher

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

How to Lubricate the construction waste crusher

xuanxuan

In recent years, with the rapid development and widespread application of the construction waste crusher industry, the crushing effect of the equipment structure is irreplaceable. Buy good quality and good equipment. More and more people are aware of the potential and prospects of the construction waste crushing machinery industry, more manufacturers began to join the crusher industry. construction waste crusher is produced by our multiple tests, has a certain strength. Well today, let's talk about the method of lubrication and maintenance of the construction waste crusher.
1, often pay attention to timely lubrication of the friction surface, to ensure the normal operation of the machine and extend the service life.
2, the machine uses grease, should be based on the use of location, temperature and other conditions to decide, the general can use calcium, sodium or calcium sodium grease.
3, to join the bearing grease for its volume of 50-70%, must be replaced once every three months; for new oil must be cleaned with clean gasoline or kerosene bearings and bearing seat dirt.
4, brackets and brackets contact at the machine before the start, you must add grease.
If you have any unclear or want to know, you can come to our factory, our technical staff here will give you a detailed explanation, SBM also welcome everyone at any time.