Explanation of the Causes of the Deformation of the Calcium Raymond Grinding Spindle
In recent years, advances in powder processing technology have also led to the use of a finer grain size for ash calcium powder, which has led to a wider range of applications and applications. The processing of powdered equipment is inseparable from the use of gray calcium Raymond. The role of gray calcium Raymond Mill as a machine equipment, no matter how good it will inevitably fail, some users will find the spindle deformation phenomenon in the process of using the device, for this, SBM machinery for you to carry out the gray calcium Raymond spindle deformation Reasons for big explanations.
Since the main shaft of the lime-calcium-raymond mill is installed vertically and the feed inlet is at the top, when the ash-calcium feed particles are too large, it will directly enter the inside of the equipment and come into contact with the main shaft of the equipment due to collision with the main shaft. Too many times, the quality is great, will cause the main shaft to be deformed. Therefore, in order to avoid the occurrence of such a situation, attention should be paid to the control of the feed grain size of ash calcium.
2. Overloaded work original
The machine also needs to rest. When the lime calcium Raymond mill is overloaded for a long time, it will inevitably increase the working pressure of the spindle, which will aggravate the wear of the spindle and lead to deformation of the machine spindle. For this situation, you should avoid overloading the equipment.
3. Rusty is not timely
When the gray calcium Raymond has rusted, it has not been treated in time. In this case, the strength of the spindle will be reduced due to rust, and the deformation will be very serious and will cause the equipment to run unsteadily. In view of this situation, users should pay attention to the processing and maintenance of the equipment in time and do not be lazy.
4. The material is not
Here, it means that when the gray calcium Raymond contains metal particles in the material, it will be mixed into the equipment and it will collide with the spindle, causing the spindle to deform. In this case, it is necessary to determine that there is no impurity in the ash calcium.