Ultra-fine grinding in the production of production and a lot of factors are related to our production, if found that production has changed, it is necessary to find timely factors, and to solve the impact of many factors on the yield, One of which is the nature of the material, and the nature of the material, including hardness, viscosity, etc., where the analysis of the water is the input of the yield has no impact on the problem.
Through the introduction of the principle of ultrafine mill can be found in the machine for the processing of materials, the blade first shovel shovel shovel grinding wheel between the grinding wheel, and then, in the roller under the strong centrifugal force and gravity, stone Was tightly crushed on the grinding ring, so that the material gradually broken into a powder, the process, the grinding chamber will produce a lot of heat, this time, if the material in the water content, then the water will have heat A certain degree of evaporation, then it will affect the direction of movement within the grinding chamber, not only will affect the size of the output, but also a serious cause of blasting accidents, which for the production of ultra-fine milling machine, very Adverse, so the control of moisture in the feed is very important.
The other is in the work of the time, if the intake of water content is relatively large, when grinding, it will be because of the humidity so that the powder adhesion in the grinding chamber, which is likely to cause the production of clogging, and facing the adhesion Of the powder more and more, it will cause ultra-fine grinding speed, pressure changes, and thus make the output decline, this larger water stone, but also cause the mill inside the parts wear and tear increase the phenomenon of affecting the machine Service life.
The article mainly introduces the impact of stone moisture on the yield of ultra-fine grinding. The above analysis of this problem is more detailed. If the moisture content in the feed is large, the effect on the yield is mainly two aspects. The direction of the movement of the air flow to change the direction of the output, and second, the humidity is easy to adhere to the powder in the grinding chamber, affecting the speed and pressure, and thus cause the decline in production, so in order to ensure the production of ultra-fine milling machine To ensure the rationality of moisture in the feed.